| Models | E-480.00 |
| Function | Power amplifier (servo-controller option) |
| Channels | 1 |
| Maximum output power | 2000 W (see link) |
| Average output power | Equivalent to 630 W reactive power |
| Peak output current 50 ms | 100 mA |
| Small-signal bandwidth | 5 kHz (660 nF); 1 kHz (3.4 µF) |
| Large-signal bandwidth | 1.4 kHz (660 nF); 350 Hz (3.4 µF) |
| Current limitation | Short-circuit proof |
| Voltage gain | -100 ±1, +100 ±1 (selectable) |
| Polarity | Negative/positive/bipolar (depending on connector configuration) |
| Control input voltage | 0 to +10 V, 0 to s10 V (jumper selectable) |
| Output voltage | -0 to s1000 V (-750 to +250, -500 to +500, -250 to +750, 0 to +1000 V, depending on connector configuration) |
| Ripple | Up to 0.3% (depends on voltage range and capacitance of PZT) |
| DC-offset setting | 0 to 100% of output voltage range, set with 10-turn pot. |
| Input impedance | 100k W |
| Control input sockets | BNC |
| PZT voltage output sockets | LEMO special connector |
| Dimensions | 450 x 158 x 288 mm (see link) |
| Weight | 8.6 kg |
| Operating voltage | 90-120 / 210-250 VAC, 50-60 Hz |