deutsch
Contact :: Impressum  

 


PICA™-Shear actuators are available in cross-sections from 3 mm x 3 mm to 16 mm x 16 mm.
PICATM -Shear actuators are available in cross-sections from 3 mm x 3 mm to 16 mm x 16 mm. PICA™-Shear actuator dimensions, in mm. See technical data table for explanation of A, B, L.
PICATM -Shear actuator dimensions, in mm. See technical data table for explanation of A, B, L.


 ceramic interface (both sides)

 PTFE insulated wires for high voltage control (red+250 V / black GND, length > 100 mm, D < 0.7 mm), axial position centered at the termination line of the stack element

 number of axis elements and wires is dependent on stack type

We have a new Website on
Piezo Actuators, Components, Products, Piezo Ceramics >>>

 

 

 

PICATM -Shear Piezo Actuators-Compact Multiaxis Motion P-111   P-151 

  • Compact Multiaxis Actuators
  • X, XY, XZ and XYZ Versions
  • High Resonant Frequencies
  • Extreme Reliability >109 Cycles
  • Picometer-Resolution/Sub-Millisecond Settling Time
  • Ultra-High-Vacuum-Compatible Versions to 10-9 hPa
  • Non-Magnetic and Clear Aperture Versions

PICATM -Shear series multi-axis piezo actuators are only available from PI Ceramic. These devices are extremely compact and feature sub-namometer resolution, ultra-fast response and high force generation. They are available in a variety of geometries providing displacements to 10 µm.

High Stiffness under High Duty Cycles
PICATM -Shear actuators exhibit high stiffness, both parallel and perpendicular to the motion direction. Based on the piezoelectric shear effect, PICATM -Shear X and XY actuators show almost twice the displacement amplitudes of conventional piezo actuators at the same electric field strength. Consequently they can be made smaller and have higher resonant frequencies. This results in reduced power requirements for a given induced displacement in dynamic X- and Y-axis operation.

Ultra-High Reliability, High Displacement, Low Power Requirements
PICATM actuators are specifically designed for high-duty-cycle applications. All materials used are specifically matched for robustness and lifetime. Endurance tests proved consistent performance even after billions (1,000,000,000) of cycles. The combination of high displacement and low electrical capacitance provides for excellent dynamic behavior with reduced driving power requirements.

Flexibility: PI Ceramic's Strength
All manufacturing processes at PI Ceramic are set up for maximum flexibility. Should our standard actuators not fit your application, let us provide you with a custom design. Our engineers will work with you to find the optimum solution for your application, at a very attractive price, even for small quantities. Some of our custom capabilities are listed below:

  • Vacuum Versions to 10-9 hPa
  • Non-Magnetic Designs
  • Clear Aperture
  • Custom Endplates (Alumina, Glass, ...)
  • Extra-Tight Length Tolerances, to 0.02 mm
  • Optical Surface Quality
  • Custom Geometries
  • Custom Displacement
  • Custom Load / Force Ranges
  • Low-Temperature Designs, Down to L-He
  • Combination with Piezoelectric Shear Sensors (no Pyroelectric Effect)

Short Leadtime for Standard & Custom Designs
Because all piezoelectric materials used in PICATM actuators are manufactured at PI Ceramic, leadtimes are short and quality is outstanding. All standard and custom PICATM actuators are delivered with performance test sheets.

Amplifiers, Drivers & Controllers

PI offers a wide range of control electronics for piezo actuators (see page 28 and www.pi.ws) from low power drivers to multi-channel, closed-loop, digital controllers.

Of course, PI also designs custom amplifiers and controllers.

Application Examples

  • NanoPositioning
  • Precision mechanics
  • Active vibration cancellation
  • Semiconductor manufacturing and testing
  • Laser tuning
  • Atomic force microscopy
  • Switching
  • Scanning applications
  • Micro-stepper motors

Mounting Guide